DURAMAX INTRA FTS

Sizes Available:

• 1980 x 710mm
• 1980 x 760mm
• 1980 x 810mm
• 1980 x 860mm

The smarter interior door. The answer for all interior wet areas. PU dense foam core provides excellent insulation rating with no rotting, swelling or twisting.
Superior durability for high-traffic areas, water resistance for bathrooms, kitchens and other wet areas, smooth fibreglass skins for a hygienic finish, excellent stability and exceptional impact resistance.

• 35mm thick.
• LVL styles and rails for superior stability.
• PU dense foam core for high insulation and low sound transmission.
• No swelling or breakdown thanks to the fully sealed composite PVC resin edges on 4 sides of door.
• Straight and stable, no bowing due to LVL stiles.

Construction

• GRP/fibreglass Skin.
• Made from sheet moulding compound.
• Smooth skin doors 1.6-2mm skin thickness.
• LVL supporter - Each door is constructed using an internal structure supporter manufactured from LVL (Laminated Veneer Lumber).
• Stile of both sides - The stiles are one (1) piece of composite PVC stile and one (1) piece of LVL.
• Top rail - The top rail is one (1) piece of composite PVC.
• Bottom Rail - Bottom rail is one (1) piece of composite PVC.
• Lock Block - Lock block is approximately 350mm long, 75mm wide, on 1 side as marked on door.
• Glue - The glue used to bond the fiberglass door skins to the frames is Urethane Adhesive Resin.
• Core - PU foam.

Sound transmission/insulation: STC 25 / Rw 30 / Rw + Ctr 25 (modelled based on standard construction and materials) Impact resistance: Test results of a door of similar materials and construction:
Design pressure: 50.0psf
Water penetration resistance 7.5psf.

The FTS Duramax door can be trimmed 10mm in overall height and width (must be even amount off both sides).